Mavcoat® Products for Recycled Rubber

Mavcoat® Products for Recycled Rubber

Never run out of mold release again. Ask us about our on-site consignment inventory plan. Save on freight. Do not pay until you use the product. Order before freezing winter temperatures set in and never worry about getting your product safely to your site.

 

Call to ask about our Consignment Program and how we can set that up for you!

Mavcoat® BR

  • Emulsion concentrate usually diluted with water at varying levels to achieve the release needed for a given binder system. Prevents binder from building-up on mold surface. Keeps tooling clean to yield longer production runs between cleaning cycles.

Mavcoat® BR-1

  • Ready-to-use, water-based coating that requires no dilution. Releases pMDI and MDI binder systems. Adheres strongly to mold surface and does not transfer. pMDI is an unconventional adhesive, which is sometimes more difficult to release than traditional binders. It has also been known build-up more quickly on mold surfaces. BR-1 yields an anti-stick coating that mitigates this build-up.

Mavcoat® BR-2

  • Water-based, “super-release” required when unconventional, stronger binder systems are used. Cures on mold surface to provide tenacious coating that withstands heavy abrasion during the molding cycle.

Mavcoat® CDNA

  • Specialized release coating for molded parts that must be free of any residue because the finished parts will be painted or bonded to after molding.

Maverix Mold Cleaner – G

  • This gelled product clings to vertical surfaces, stays in place, and does not run down the tooling surface. It is a non-flammable cleaner that dissolves, encapsulates, and lifts all thermoset resins, epoxies, phenolics, urethanes, and thermoplastics from metal molds. The gel strips residue build-up from the tooling surface without attacking the metal.

Maverix Mold Cleaner – L

  • This is the liquid version, which is also non-flammable and dissolves, encapsulates, and lifts all thermoset resins, epoxies, phenolics, urethanes, and thermoplastics from metal molds. The liquid form allows Cleaner-L to be used in dip tanks and parts cleaning operations.

Maverix Cleaner 202

  • Strips polymer-based, semi-permanent release coatings from composite or metal molds.

Please request a sample to prove our technology in your process.