Never run out of mold release again. Ask us about our on-site consignment inventory plan. Save on freight. Do not pay until you use the product. Order before freezing winter temperatures set in and never worry about getting your product safely to your site.
Call to ask about our Consignment Program and how we can set that up for you!
Is a quick-cure, fast evaporating, semi-permanent mold release coating for the release of reinforced polyester and vinyl-ester resins. Upon evaporation and cure, parts demold with a high gloss finish.
Is also a quick-cure, fast evaporating, semi-permanent mold release coating for the release of reinforced polyester and vinyl-ester resins. FGR-4 is a stronger, polymer-based release that works better for non-gel coated parts and can be wiped or sprayed onto the mold surface.
Is designed to seal the porosity of composite tools made from polyester, vinyl-ester, epoxy, and all other resin surfaces. AD helps to improve the surface quality of finished parts even for class A finished molds.
This gelled product clings to vertical surfaces, stays in place, and does not run down the tooling surface. It is a non-flammable cleaner that dissolves, encapsulates, and lifts all thermoset resins, epoxies, phenolics, urethanes, and thermoplastics from metal molds. The gel strips residue build-up from the tooling surface without attacking the metal.
This is the liquid version, which is also non-flammable and dissolves, encapsulates, and lifts all thermoset resins, epoxies, phenolics, urethanes, and thermoplastics from metal molds. The liquid form allows Cleaner-L to be used in dip tanks and parts cleaning operations.
Is a strong water-based cleaner that strips wax-based release coatings from composite or metal molds. This is a good cleaner for removing the yellowish-brown build-up from composite tooling that occurs with repeated use. Cleaner 505 also cleans light films of styrene buildup.
This is a strong solvent-based cleaner that removes wax-based release coatings from composite or metal molds. Simply wipe 303 onto the mold surface and allow a short contact time for the chemistry to break down the residues and wipe clean. 303 will not harm mold surfaces – even those with class-A finishes.
Strips polymer-based, semi-permanent release coatings from composite or metal molds.
Send us a message!
* denotes a required field.