Mavcoat^® SR Mold Release for Silcone Rubber
Silicone elastomers can be difficult to demold and there are few release options to choose from.  Knowing this, the technologists at Maverix Solutions undertook a project to develop a novel release system that would revolutionize the release of silicone and fluorosilicone elastomers.  After 18 months of synthesis and testing, Mavcoat SR was introduced to rubber molders and found to be superior to anything ever used.  Try Mavcoat SR and see for yourself how it releases parts, cleans dirty molds and maintains mold luster during production.  And since Mavcoat SR is clear, post-cure part discoloration is eliminated so scrap rates are greatly reduced.

Mavcoat 265-T
Water-based release agent for frequent application during molding of general rubber goods.

Mavcoat BML
Water-based release agent for rubber that requires good flow through complex molds.

Mavcoat MXC
A semi-permanent water-based release agent for difficult elastomers such as peroxoide-cured EPDM.

Mavcoat 2037
A semi-permanent water-based release agent for the most difficult elastomers, such as AFLAS, in complex molds.

Mavcoat SR
A specialized semi-permanent release agent for the release of silicone and fluorosilicone.  Unique chemistry cleans mold and maintains lustrous surface.  Will also release organic rubber elastomers.

Mavcoat WNS
Unique semi-permanent water-based release agent that releases all elastomers without the use of silicone fluids.  Used extensively throughout medical, military and aerospace applications.

Mavcoat EF-ND
A concentrate designed for dilution with 3 parts water for economical release applications for molding of general rubber goods.

Mavcoat TZ-4
This new technology is a semi-permanent, water-based coating that releases all organic rubber elastomers such as fluorocarbon, nitrile, butyl, natural, and even peroxide-cured EPDM.  TZ-4 is unique because it lasts a very long time and does not transfer to the finished part.  Therefore, defects such as knit lines in critical parts like O-rings and gaskets are eliminated.  This property also makes TZ-4 an excellent choice for molding rubber-to-metal.  Due to its semi-permanence, application may only be required once per shift.  Since TZ-4 releases all organic rubber compounds, it will be the only release needed on the production floor, which consolidates and simplifies another of the manager’s tasks.