Mavcoat™ mold release coatings meet the unique challenges of today’s rotational molders, such as shorter cycles using higher temperatures to speed production and highly engineered molds with exacting tolerances. With Mavcoat™ rotational mold release, customers achieve multiple releases, no transfer, reduced pigment build-up, lower scrap rates, better cosmetics, increased productivity, and the safety of a water-based system. Read on about Mavcoat™ rotational mold release’s unique properties and the benefits it provides to the molder.

ANTISTATIC CHEMISTRY
Mavcoat™ rotational mold release coatings contain proprietary antistatic compounds that prevent pigments from streaking, accumulating, or swirling due to static electricity buildup during the rotational molding cycle. This is particularly important when molding today’s granite finishes. Use of Mavcoat release coatings allow granite colors and patterns to come out separated and clear. And parts with heavy pigment loads such as dark browns or greens appear uniform.

NO SEALERS OR PRIMERS REQUIRED
Just apply Mavcoat™ rotational mold release and begin molding parts. No sealers or primers are required to prepare the mold. This saves time and money because only a single coat is needed to condition the mold and release parts.

ELIMINATE TORCHING OF FINISHED PARTS
Mavcoat™ rotational mold release agent does not transfer because it wets the surface of the mold uniformly and has a greater affinity for the mold surface than the finished part. In most cases, this eliminates the white film transfer so finished parts have excellent cosmetics right out of the mold, which reduces or eliminates the need to torch parts.

NO CURE CYCLE
The innovative Mavcoat™ mold release technology is ready to work as soon as it contacts the mold. Just apply a uniform coating of Mavcoat and fill the mold. Since no cure cycle is necessary the molder saves valuable production time and energy costs.

VERSATILE AND SAFE
Mavcoat™ rotational mold release products are semi-permanent water-based coatings that provide multiple releases with a single application for LLDPE, LDPE, MDPE, HDPE, XLPE, PP, and Nylon.

PRODUCTS

MAVCOAT™ C1-A Mold Release is a semi-permanent water-based mold release emulsion for release of all thermoplastics. It contains a proprietary antistatic compound that reduces and nearly eliminates the accumulation of static electricity during rotational molding, which prevents color swirling and streaking of pigments to produce uniform color and excellent part cosmetics.

MAVERIX CLEANER 202 - A concentrated heavy duty degreaser used to clean pigment build-up from rotational molds and for general mold cleaning. It is a blend of water-soluble solvents, surfactants, water softeners, and corrosion inhibitors. 202 cuts through grease, oil, dye, and rust when applied via pressure washer, trigger sprayer, or rag.