Mavcoat 178 PAINTABLE MOLD RELEASE
Mavcoat 178 contains no silicone oils and is designed for all thermoplastic resins where post decoration is required. Mavcoat 178 will not interfere with painting, hot stamping, or vacuum metalizing. Mavcoat 178 should be used on white or clear parts that are easier to demold. Always test this mold release agent in your application to insure compatibility. If difficulty is encountered, parts can be cleaned with a detergent or a mild solvent. Packaged twelve 16 fluid ounce cans per case.

Mavcoat 188 PAINTABLE MOLD RELEASE
Mavcoat188 is our workhorse release agent for all types of injection molded plastics and contains no silicone. Finished parts can be hot stamped, printed, metalized or painted. Use Mavcoat 188 on parts that contain color and on more intricate molds that require a longer release coating. Mavcoat 188 Mold Release does not build up on mold cavities. Use this mold release agent sparingly, a thin film is all that is needed. Mavcoat 188 does not migrate or drift through the air. Packaged twelve 16 fluid ounce cans per case.

Mavcoat 425 MOLD CLEANER
Mavcoat 425 Mold Cleaner Special nozzle delivers a powerful flushing steam to remove contaminants from mold surface. No wiping necessary because product evaporates completely while flushing away dirt, grease, and protection films such as Mavcoat Mold Saver. Because Mavcoat 425 is fast evaporating, it is ideal for cleaning cold molds and contains no chlorinated solvents, CFCs, or ozone depleting chemicals.

Mavcoat MOLD SAVER
Mavcoat Mold Saver Deposits a protective coating on mold surfaces that stops corrosion and oxidation, seals out condensation, and displaces moisture. Neutralizes fingerprints and corrosive acidic deposits and will not bleed out and mark parts during production. Mavcoat Mold Saver is easily removed by Mavcoat 425 Mold Cleaner so no parts are wasted upon start up.